Wonder Shower - Shower HeadsAttractive in chrome, brass, gold and nickel finishes, The Wonder Showers add a beautiful touch to any shower decor. Moveable arm makes adjustment easy and comfortable. Don't blame us if you're late for work!
The Wonder Shower has a standard 1/2" female pipe inlet so it can be installed on any standard shower fitting. You can install it yourself very easily because it's designed to be installed with very little actual plumbing work. The only time you need a wrench is to remove your old showerhead. The Wonder Shower comes with simple, easy to follow installation instructions. You can install the Wonder Shower arm where your old showerhead used to be. Simply remove the old showerhead, clean threads on old arm and screw on your new Wonder Shower. Use lots of teflon tape so the Wonder Shower will tighten easier, allowing it to tighten in place with the wing nuts in line with each other. It is also easy to replace the old shower arm along with the showerhead. You simply unscrew the old arm from the female elbow behind the wall, tape the threads on both ends of a new 1/2" x 2" L brass male nipple and screw one end in where the old arm came out. Then attached your Wonder Shower and you're done! Note: You will probably need an 8" pipe wrench to loosen the old shower arm. |
||||||||||||||||||||||||||||||||||
Wonder Shower Standard 
Wonder Shower Standard 
Wonder Shower Standard 
Wonder Shower 
Wonder Shower 
Wonder Shower 
Wonder Shower 
Wonder Shower 
Wonder Shower 
Wonder Shower 
Wonder Shower 
Double Wonder Shower Combo 
Double Wonder Shower Combo 
Double Wonder Shower Combo 
Double Wonder
Double Wonder
Double Wonder